the Depth of the laptop battery charge and discharge

Posted by ecsem1 on Jan 15, 2010

Charge: Lithium-ion battery charging process of the whole, divided into “fast charge constant-current” and “constant-voltage charging current decreasing,” two phases. The so-called “constant-current fast-charge” means a charge has just begun when the charge current is fixed by ibook g4 adapter and the charge voltage to follow the battery terminal voltage gradually increased until it reaches the nominal voltage charging. When the battery terminal voltage has reached the standard value, the control chip will be automatically transferred to the “Constant current charge decreasing” phase, this time charging voltage will no longer continue to rise, while the charge current is to follow the battery capacity is rising gradually decreasing and finally reached zero, and so will complete the entire battery charging process for Dell Inspiron 510m Battery.

In the meantime, the process of charging the charge arising from voltage, current, time and other data curves will be recorded in the cell are known as “charge-discharge control chip” in memory. “Battery Management IC” is through the retrieval of these data, and is calculated by sampling data such as Toshiba PA3399U-1BRS battery capacity, which is what we read in the Battery Information where the value of Wh.

Fixed: After repeated charging and discharging the battery after use, its built-in chip in the charging and discharging of data will of course change. If at this time “battery management chip” has no chance to re-read the newer, more complete data, it calculated battery capacity would of course not accurate to Dell Inspiron 710m Battery, and to the user the impression that the battery capacity has decreased, but the reality on the battery capacity and there is no real reduction in the actual. Some brands of notebook computers comes with charging management software works, that is, the process of charging Refresh “charge-discharge control chip” in memory of the data, thus ensuring the “battery management chips,” the correctness of calculations to VGP-BPS9/B.

If you take a close look over the use of laptop computers instructions, you will find among them the “computer in use one month later, the battery should be to make a full charge and discharge operation” instructions. Its main purpose is to use the depth of charge and discharge dell inspiron 1721 battery a way to modify the charge and discharge control chip registers inside the curve data, so that the battery charge control and the nominal capacity and the actual situation of the battery corresponds to arrive at the correct battery capacity values.

the article is via :

  1. http://batteryknowledge.tumblr.com/
  2. http://acer-battery.tumblr.com/
  3. http://apple-battery.tumblr.com/
  4. http://compaq-hp-battery.tumblr.com/
  5. http://dell-battery.tumblr.com/
  6. http://fujitsu-battery.tumblr.com/
  7. http://toshiba-battery.tumblr.com/
  8. http://ibm-lenovo-battery.tumblr.com/

The Proper Way to Windows 7 & Vista laptop battery charge and discharge

Posted by ecsem1 on Jan 15, 2010

In Windows 7, Microsoft introduced a new power supply options, through the CPU and other devices to adjust in order to reduce energy consumption and increase Sony VGP-BPL8 battery life. But in addition, for the use of laptop batteries, which pay attention to it?

Q: laptop battery needs to wait until all used up rechargeable power do?
A: In today’s era of lithium batteries, so the idea is entirely erroneous. This principle is only applied before. For lithium batteries, the Latitude D600 Battery ran out and then filled with a long time do not have any effect or even harmful. Because the lithium battery does not exist so-called “buffer effect.” Laptop battery life in general only with the man-made damage or natural lifespan. Basically, the battery life are fixed 300-600 charge and discharge times, for most people, you can use almost 2-4 years.

Q: When the power supply connected to the battery when you need to disconnect?
A: Many notebook users have asked this question, the answer is the need does not need to, depending on the actual usage. Connecting DC power supply without removal of the battery on the battery, and does no harm, because the Dell Inspiron 1721 Battery is fully charged and then, after no longer accept any power injection, power will shift all of the direct power supply system notebook. But when the laptop high-speed operation, the internal overheating better to remove the battery, otherwise it is harmful.

Q: So what should be done correctly to the laptop battery does?
A: It should be possible to avoid the 0%, rechargeable battery with powerbook g4 adapter runs out of light, as this will give the battery a lot of pressure to cause harm. More feasible approach is about 20-30% in electricity consumption when the remaining charge.

The battery from the phone experience, many people may feel exhausted all the laptop battery should be recharged. But in fact the notebook lithium batteries in the “light / charge” is a limited number of areas, and all used up rechargeable battery life will be greatly shortened.

At the same time, the battery should be relatively dry areas for recharge Also note that the heat issue, which is the enemy of the battery.

the article is via :

  1. http://sonybatteries.wordpress.com/
  2. http://compaqbattery.wordpress.com/
  3. http://levonobattery.wordpress.com/
  4. http://fujitsubattery.wordpress.com/

Powerd By Wordpress for laptop battery. All copywrite keep on.